Help!

      Help!

      HI All

      I am a new member after purchasing a Biopress 6000 for my small pond, after trying to understand the instructions I have finally got the pump and filter working, however the water is still very dirty. I am unsure if the light even works on it! Can anyone give me some advice please? Especially on how to clean out the pump in easy to understand - am a bit of a technophobe!

      Thanks

      Tina

      Dear Tina,

      Remove hose from the filter outlet by turning off the union nut and screw on a dirt draining hose (D1). Switch on the
      filter pump (C1). Vigurously pull on the cleaning handle and „pump“ several times (D2). In this manner, the foam filters
      are mechanically cleaned until the draining water is clear.

      Your Biopress needs minimum 4 weeks to work perfect. To control the UVC clarifying unit, remove the cover cup, there is a blue light. Watching in the night, for better cnntroling. 8|
      Gruß

      Teichmuschel